TCL LCD20VS, Service Manual

Page: 11 / 72

20’’ LCD TV TCL LCD20VS
11
2.3 How to Connect
Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen
down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the
screen
1: VGA input .
2: VGA audio input .
3: AC power input terminal
4: Headphone out put
5: AV signal input
6: Left video/audio track input
7: Right video/audio track input
8: S-Video signal input
9, 10 and 11: Y
、
Pb/Cb
、
Pr/Cr Component signal input
12: Y Pb Pr left audio track input
13: Y Pb Pr right audio track input
14: TV signal input
15: AC main switch
VIDEO RECORDER
How to connect
1. Connect the supplied antenna cable to the RF IN port of your VCR.
2. Connect another RF cable from the port of your VCR to the antenna port of you TV set. If you have connected
the video/audio cable to the video AV port, you may have better sound and picture when playing the VCR .
If your VCR has an S-VHS video jack:
For improved picture quality, connect an S-Video cable with the S-VIDEO input on the TV.
S-Video does not provide audio, audio cables must still be connected to provide sound(AV and S terminal share one
audio input).