TCL L55E5800UDS, Service Manual

Page: 16 / 43

R&D
SHENZHEN
Date 2013/12/2
Page
12
- 7 -
- 7 -
Index
Draft
of 12 Pages Name

Advises for adjust while balance: make sure values of
“
G GAIN” / G OFFSET
using default value ,the Normal temperature should been not adjust .but sometime the
Warm temperature maybe adjust.
4 Audio Alignment
P204: DIGITAL AUDIO OUTPUT (Optical SPDIF OUTPUT)
5 Shop initial
Shop initial should be done at the last alignment.

Enter the factory menu “ Factory menu
”

Choose “Reset Shop
” and press “ok” key on the remote control
 Shows “ok” on the screen, exit factory menu, Then power down
The Out Of Box Settings are according to the customer‟s requirement.
6 Factory Menu
6.1 How to enter factory menu by remote control

Menu On and inside to Picture Menu
Then inside Picture Setting Menu
And move the cursor to Vedio, select Contrast item.
Press the Password‟9735‟ (should be finished in 3 seconds)

Press “ Go back
” key on the remote control directly when FACTORY MODE HOTKEY
set ON (while the character "P" displaying on the blow-left of the screen).
6.2 To go back or exit factory menu:

Press “MENU” key on the remote; the “Cancel” key will exit factory menu directly.
7 Service menu
7.1 How to enter service menu by remote control

Menu On and inside to Picture Menu
Then inside Picture Setting Menu
And move the cursor to Expet Setting, select Contrast item.
Press the Password “1950”
7.2 To go back or exit service menu:

Press “MENU” key on the remote; the “CLEAR” key will exit factory menu directly.

The service menu Item

There is only one item: the project ID, press the Left or right can change the project ID and will display
this project hardware information.