Factory Test & Alignment Specification For MS08PA-LA Series (V1.0).Doc
Page 6 of 18
See Appendix
“
How to upgrade MAC Address
DeviceID (DID) and UserID (UID)
Purpose is to allow Other Network Download (OND) and further specific Services over dedicated
portal based on UK.
Description/Portal Links/Flow chart are welcome?
For such, specific DID (32 bytes) and UID (8 bytes) needs to be paired and overwritten into
memory for internal client encryption.
Here are below codes examples:
Device ID
User ID
BE4F255BBD106BC8F806AE456350D91F 3546187
Those DID/UID codes can only be set using UART commands following enclosed SIACP
requirements (rev. v3.9).
SIACP v3.9
(EN_20110613).pdf
See Appendix
“
Instructions of U
pdating DID,UID and MAC
”
LAN Test
A rough LAN test can be done by connecting DHCP server to TV’s RJ45 and check that IP,
subnet mask, DNS addresses, … are visible on “
User menu
Setting
Network
Setting
Cabal Network
OK
” (ensure that “Internet Connection” is Enabled at first).
More in-depth test can be performed faster using suitable UART/IR commands following SIACP
requirements. SW will internally manage Network ID (NID) flag controlling all MAC/DID/UID
integrity to facilitate PA screening further.
Note:
It’s not necessary to check video and audio from DLNA server.
See Appendix
“
NETWORK CONNECTION AND TEST
”
2.
Product Assembly (PA): Test & Alignment
2.1.
Factory Menu
Follow the below steps to pop-up the Factory menu in case of “
FactoryKey
” is disabled:
- Press RCU “
MENU
” key to display main menu
- Select “Setting” and press “
OK
” key to enter into Setting submenu
- Select “Picture” and press “
OK
” key to enter into Picture submenu
- Scroll down to “
Contrast
” item
- Press the subsequence RCU keys “
9
”, “
7
”, “
3
” and “
5
”
In case of “
Factory Key
” is enabled, just press RCU “
Return
” key to pop-up again the Factory
menu.
