第
3
页共
11
页
5-SHOP
DO
Reset the set after production alignment;(This
operation will remove all unnecessary factory
value; The factory hotkey will be turn off)
OK
6-NVM reset
DO
System initialization. Restore all data except
the White Balance and ADC data ;Only for R&D.
OK
7-SET FAC CH
DO
Preset specific factory channels for specific
factory. Press left and right button to select
the factory, and then press OK to confirm.
OK
8-POWER ON
LAST
ON: Always turns on TV when AC power on
STB:Always goes to standby mode when AC power
on
LAST:Restore the status before the last AC power
off
OK
9-USB UPDATE
USB update,
(refer as follow)
OK
Note: Below the factory menu, some model information are showed, including
software version, Project Name, SIACP Version, and SW release time.
ADC Submenu:
ITEMS
Default
Setting
Description
Status
Source
RGB/YPbP
r
(HD)
Sources need calibration. RGB means PC and
YPbPr(HD) means YPbPr
OK
R-GAIN
128
R-OFFSET
OK
G-GAIN
128
G-OFFSET
OK
B-GAIN
128
B-OFFSET
OK
R-OFFSET 128
R-GAIN
OK
G-OFFSET 128
G-GAIN
OK
B-OFFSET 128
B-GAIN
OK
AUTO ADC WAIT/OK
With appropriate pattern (mentioned below)
inputted, press left or right key to start auto
calibration.
OK
WHITE BALANCE Submenu
ITEMS
Default
Setting
Description
Statu
s