13
Advanced Functions
- Press the blue button to quit the time shift function.
Notes:
- Before you plug the USB device to TV, make sure you
have backed up the data on the device to avoid
unusual performance and data los
s
.
- We recommend that you use a USB device with at
least 1Gb free space and a disk speed faster than
5.0M/sec.
- The bigger file size for time shift, the longer you can
record the programme.
- If you attempt to channel change during time shift, a
message prompts to let you select
Yes
or
No
. You can
select
Yes
to exit the time shift function and execute
the channel change.
Reset shop
Allows you to reset the TV to factory default settings.
1. Select
Setup
, then press
OK
to confirm.
2. Select
Reset shop
and press
OK
or the right direction
button to enter.
3. Use the digit buttons to enter the password to enter.
4. Press the left or right direction button to select
OK
and
press
OK
to confirm.
5. The Initial setup menu appears. Follow the related
Instructions.
Setup
your
favourite
channels
You can create a list of up to seven of your favourite TV
channels.
1. Press
LIST
.
2. Press the yellow button to enter
Channel list
selection. Press the up or down direction button to
select the favorite list you want to set up your favorite
channels. Then press
OK
to enter the selected list.
3. Press the blue button to start to edit your favorite list.
Press the up or down direction button to scroll
through the channel list and press
OK
to select or
Unselect it.
4. Repeat this procedure to setup other favorite channels.
5. Press
LIST/Exit
to exit.
press the button on, for example, your TV
remote control. This switches your TV and all
connected HDMI devices to standby mode.
Location
: use the left or right direction button to select
Home
or
Shop
mode.
Home
mode is the default. If
Shop
mode selected, the picture will be displayed in
Vivid
mode. In
Shop
mode, you can adjust the picture
mode, but when turning on the TV next time, the Picture
preset will restore to
Vivid
mode, and a prompt about
Shop
mode will appear.
Customising the input settings
You can configure your TV according to the equipment
you connect to it.
1. Select
Setup > Input settings
.
2. Press the
OK
or right direction button to enter
Input
settings
.
3. Press the up or down direction button to select a
connector your equipment is connected to.
4. Press the left or right direction to select the type of
apparatus attached to this connector.
5. Press
Menu
to return to the
Setup
menu. After
configuring, the selected source label will be
displayed after the name of the related connector in
the source list when pressing
Source
on the remote
control or
OK
on the TV set.
Diagnostics on digital TV channels
1. Select
Setup > Diagnostics
.
2. Press the
OK
or right direction button to display some
signal information on current digital channel, such as
signal strength, Freq.(KHz), etc..
Time shift
Allows you to record the TV programme so that you
won't miss the favourite part even if you go out. Before
you use the function, connect a USB device to the TV
first. For the first time, you should do the disk setup for
the USB device.
1. Select
Setup > Time shift
.
2. Press the left or right direction button to select
On
to
switch on the time shift function, then press
Exit
to
close the menu.
3. Press
Option
on the remote control and select
Time
shift
, then press
OK
to confirm.
4. Follow the directions on the screen to do the setup.
5. After the disk setup is done, press
Option
and select
Time shift
.
6. Press
OK
to display the time shift menu.
- Press the red button to pause the picture and begin
the time shift.
- Press the red button to play the recorded part.
- When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press the red button or
OK
to call out the time
shift Menu.
- Press the green button to fast backward or the
yellow button to fast forward.
