MSD 6X181 6X182-FACTORY MENU OPERATING MANUAL
4
4.5 Volume Curve
To change the volume page.
Note: the volume curve mode should not set here
4.6 WHITE PATTERN
3UHVVWRJHQHUDWHNLQGVRIRXWSXWSDWWHUQOLNHZKLWHUHG«
4.7 Backlight
Press to change the voltage of PIN ADJ to change the brightness of the panel.
4.8 LVDS MAP
Press to change the LVDS map (Caution: Press this may close the output
signal ,you just keep press left or right or ok, and never press any key else
especially key up and down) .
4.9 POWER MAP
Set it to:
0: Means you must press the power key to run the TV when it get power.
ON: Auto power on when get power
Last: Go to the last state when it lost power supply.
4.10 Logo
It will not show logo when open up if you set it to close.
5. DEBUG(
䇗䆩
)
5.1 QMAP ADJUST (Seldom used)
5.2 VIF
5.3 PQ NONLINEAR
²
(important)
Summary of Contents for L32D2710
Page 36: ......
