10
Avoid contacting metal parts of the appliance to avoid possible cuts or risk of personal injury.
5.
Tank Full -
When the water bucket is full, the Tank Full symbol will light up and the
compressor will turn off. The fan may continue to run for a few more minutes. Remove the
bucket with both hands and empty. Do not place the bucket on the floor when it is full
because the bottom is not flat.
Cleaning the water tank -
It is recommended to clean the bucket the with a mild detergent every
week to prevent the growth of mold, mildew, and bacteria. Once clean, completely dry the bucket
and, using two hands, place it back inside the appliance.
Continuous Drain -
A standard garden hose can be used for continuous gravity flow into a floor drain.
1.
Unscrew the cap on the back of the unit.
2.
Install a standard garden hose to the back of the unit, ensuring there are no kinks in the hose.
3.
Ensure that the dehumidifier is level, even a slight tilt can cause the water to drip down into
the drain bucket and not through the garden hose.
For Model(s) with PUMP
1.
PUMP -
Enable this function for use with a drain hose. Connect the pump drain tube and
adapter to the back of the unit. Press the PUMP button and verify the light next to the Pump
symbol turns on.
Note:
Water will still drain into the bucket but the pump will engage when the bucket is almost full.
Note:
You
must
place
the end of the drain
hose down a drain or
someplace where it
can freely drain
(bowls, buckets, etc.
are not recommended
as they can overflow).
Drai n
Hose
