TCL CM1GTA, Service Manual

Page: 19 / 45

Factory Test & Alignment Specification For MS08EP-LA Series (V1.0)
Page 12 of 18
The second method ：
 To use this method, there should be SW in mainboard to ensure TV can display normally.
 Copy the SW BIN image
“V8-6328L14-LF1VXXX.bin”
into USB stick (pen drive) root path
 Press RCU
MENU

Setting

Function

software upgrade

OK

By USB

TV display warning information, that means it is upgrading, almost 3minutes later, when
upgrade successful, TV should restart automatically.
Appendix

“How to change ProjectID with RCU”
 Process following subsequence IR codes to change project ID:
MENU+xxx
(xxx:
Project ID, ex: 001)
 Restart TV
Appendix

“
How to upgrade MAC Address
 Upgrading MAC address need to use the tool in factory and through serial command, the
specific methods according to the operation of the factory guidance.
Appendix

“
Factory Menu Description
”
1- Factory hotkey
submenu
Item Sub-item Value Note
Factory
hotkey
Off/On
OFF ： hotkey is invalid
ON
：
hotkey(Return key) is availability
2-Warm-Up Mode
submenu
Item Sub-item Value Note
Warm-UP
Mode
Off/On
Select panel On with left/right key, Press
“EXIT” key to enter the burning mode;
Press “Menu” key on keyboard to exit the
burning mode
3-ADC
submenu
As SoC as built-in A/D self-calibration mechanism, there’s not any ADC to perform.
4-White Balance
submenu
Item Sub-item Value Note
White
Balance
Source HDMI,etc
Balance source are
：
HDMI, ATV, DTV, PAL, NTSC, CMP
Color Temp
Normal
/Warm/Cool
Warm and cool value is relative to Normal
one. Normal is the default Tone mode
R Gain 000..255
R White balance (-127..+128 for gain)
G Gain 000..255
G White balance (-127..+128 for gain)