7
G-Sensor sensitivity: Set high, medium, low, and turn off.
G-Sensor calibration: Setting the car DVR initial value of G-Sensor. Note: Park your car on a flat plane in order to ensure accuracy of G-Sensor.
Language settings: You can set the language to simplified Chinese, English, and Russian.
Time Settings: Set your local time using the up/down & OK buttons. Time will display on the footage if selected under Stamp in the menu.
Format: It is recommended that you format any new MicroSD cards in the device before use. Any existing files on the card will be deleted.
Default Setting: Resets all parameters to their initial factory values.
Firmware Version: Shows the firmware release version in the device.
4. Security Settings
Under preview status, Press【
】to enter the main menu, select 【
】options, press 【
】to enter the system setup menu, press【
】/
【
】 to select the function you want to set, press the【
】to confirm the setting, function setting as following:
Playback in password: Sets whether a password is required to enter the playback mode and change the password function, original default
password is: 0000
Fatigue Driving Warning: Set ON to receive a visual & audible driver alert after 4 hours of continuous driving.
