9
Network Settings
After you connect your home network to the TV, follow the steps below to configure the network settings of your TV.
Note: the wireless network connect won't work if your TV is already connected to a wired network.
Connecting to a Wireless Network
1.
Press on the remote control. The Smart TV homepage is displayed.
2.
Press
▲/▼ to
move to the
Settings
area, select
Settings
and press
OK
to enter.
3.
Move to the
Device
area, select
Network
and press
OK
to enter. The
Network
menu is displayed.
4.
Select
Wi-Fi
and press
OK
to enter.
5.
Set
Wi-Fi
to
On
. All available wireless networks will be displayed.
6.
Press
▲/▼ to highlight the name of your wireless network and press
OK
.
7.
Using the on-screen keyboard and the remote, enter your network's password, then highlight
Enter
on the on-
screen keyboard and press
OK
. Once connected, the wireless network will be saved. Next time when you
connect to the same network, you do not have to re-enter the password.
8.
Press to close the menu and return to the Smart TV homepage.
Connecting to a Wired Network
1.
From the
Network
menu, select
Ethernet
and press
OK
to enter.
2.
Press
▲/▼ to select
Advanced options
and press
OK
.
3.
Press ▲/▼ to select
Proxy settings
and press
OK
.
4.
Select
MANUAL
, using the on-screen keyboard and the remote, enter your network's proxy information step by
step.
5.
Press ▲/▼ to select
IP settings
and press
OK
.
6.
Select
DHCP
or
STATIC
. If you select
STATIC
, you must enter your network's IP address, gateway, network prefix
length, DNS1, and DNS2 step by step.
7.
Press to close the menu and return to the Smart TV homepage.
Detecting Your Network Status
1.
From the
Network
menu, select
Network Detection
and press
OK
to enter.
2.
The
Network Detection
screen displays the connection method of your network connection.
3.
Press to close the menu and return to the Smart TV homepage.
Getting Started
