FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should
be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
FCC ID:2AZVSA321B
Warning：
•To reduce the risk of electric shock, the device has a polarized plug (one flat
is wider than the other). A polarized plug will have only one orientation in a
polarized receptacle. If the plug does not fit fully into the outlet, turn the plug
upside down, if still not, contact a qualified person to install a suitable outlet,
do not alter the plug in any way (American Standard)
•If the power cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person to avoid a hazard.
•
This device contains UV emitters. Don't stare at the light source.
- This device contains a UV-C emitter
- Do not operate appliances that are visibly damaged.
