L2E Repair Document
TCL
Communication Ltd.
Rev.
9015W Level 2 Enhance Repair Document
Page
1.0
25/62
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5.2 Disassembly tool
You may use the following tools during the disassembly and reassembly procedure:
5.3 Disassembly process
The steps of disassembly 9015W are as below.
Step 1: Remove battery cover and battery, and then take off 14 screws with screwdriver.
Plastic Flake
Tweezers
Screwdriver
(TORX6
)
Soldering iron
Pry bar
Hot wind gun
