TCL ACTV100BT, User Manual

Page: 7 / 12

7
Voice assistant
Phone voice commands enable you to speak to Siri
®
or Google Assistant™ on your smartphone using your
headphones. For more information on using Siri
®
or Google
Assistant™ , please consult the user manual of your
smartphone or Bluetooth
®
device.
00:02
Press for 2 seconds to activate Siri
®
or Google
Assistant™
. You will hear the start-up sound. Make
a request to Siri
®
or Google Assistant™ through the
headphones' microphone.
Call control
Call control Operation
Mute/unmute the
microphone during a call
Press and
Pick up or hang up a call Press once
Switch to another caller
during a call Press twice
Reject an incoming call Press and hold for
2 seconds
Adjust the volume Press or
X 2
00:02
Switch the voice language
After powering on the headphones, you will hear voice
notifications of different headphone status such as when the
battery level is low or when the headphones are connected
to the smartphone or Bluetooth
®
device. To switch to
another voice language, see the following steps.
1 Make sure the headphones are powered on.
2 Press and hold and simultaneously for 5 seconds.
You will hear a sound signal to confirm that the
voice language has been changed.
00:05
Tip
• There are two voice languages (English and Mandarin
Chinese) available for selection.
Adjust the headphone
extension cable
You can extend or reduce the length of the headphone
cable to fit your needs.
1. Pull the cable slider to
reduce the cable length.
2. Pull the cable slowly to
extend the cable length.
Note
• Adjust the headphone cable length gently to prevent it
from tangling.