EN
12
English
Chapter 4 - Using more of your TV
Installing channels
This section describes how to search and store
channels automatically. This may be done in any of
the cases below:
- you have skipped the channel installation step in the
initial setup;
- you are prompted that there are no channels in TV
mode;
- you want to retune your Freeview TV.
1.
In TV mode, press
on the remote control and
select
Channel > Channel scan
. Press
OK/
►
to
enter.
2.
The TV installs and arranges channels according
to your country. Press
▲
/
▼
to select
Country/
Region
, and press
OK/
►
to enter. Enter the
default password 1234 or your own password
in case you have changed the password in the
System > Lock
menu. Press
▲
/
▼
to select your
country and press
OK
to confirm.
3.
Press
▲
/
▼
to select
Automatic search
and press
OK/
►
to enter.
4.
Press ▲/▼ to select
Tuner mode
and press
◄/► to select
Antenna
,
Cable
or
Satellite
.
(
Note:
Satellite option is available only in selected
models.
)
5.
Press ▲/▼ to select other options to configure.
6.
After configuration is completed, press ▼ to select
Search
and press
OK
to start scanning channels.
7.
The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you want to edit the channel list,
press on the remote control, select
Channel >
Channel organizer
and press
OK/
► to enter.
Common interface
Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instructions described below. Wrong insertion of
a common interface module may damage both the
module and your TV.
1.
Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2.
Push the module in as far as it will go.
3.
Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services. This
TV set has passed CI+ certification. It is
recommended that you use a common
interface module marked with CI+.
Accessing common interface services
After inserting and activating the common interface
module, press
on the remote control, select
Channel > Common interface
and press
OK/
►
to
enter.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
Using EPG (Electronic Programme
Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select and
view programmes.
1.
Press
on the remote control, select
Channel >
EPG
and press
OK/
►
to enter, or press
GUIDE
on the remote control, the EPG menu will
appear, which allows you to get information
about the current or next programme playing
on each channel. Navigate through the different
programmes using the
▲
/
▼
/
◄
/
►
buttons on the
remote control.
2.
Use the related buttons shown at the bottom of the
screen to view EPG.
-
Catch up:
Press the
Freeview Play
button to
access the Freeview Play service.
-
Option:
Press to select date, display
p
rogramme filter, or view your schedule list.
-
Previous day:
Press to view EPG of the
previous day.
-
Next day:
Press
to view EPG of the next day.
-
Custom schedule:
Press the red button to set a
schedule.
3.
Press
EXIT
to exit EPG.
Using subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
