Factory mode
on(flash words)
P mode on
Appear factory
menu on screen
Follow the alignment
process to enter the
factory menu
Yes
No
Burning
mode
Quit burning
mode
Panel NG,
change panel
End
No
YES
Press
Return
key on remote
control
Choose
factory hotkey
to
OFF
or choose
Shop/Shipping Reset
END
PS: If you choose
Shop/Shipping Reset
, the TV will automatically
restart. When start again, the TV turn to welcome screen.
Picture
changing
Press
Menu/ Input/
Source
switch on TV
key pad
PS:
Most of the time, main
board burning mode
have time records on
screen.
If the TV can not exit
burning mode, you can
check panel CLK signal if
the voltage is not
1.1V~1.3V, panel NG.
8.P mode on and burning mode
Summary of Contents for 43A8000/3RT285
