TCL 32D2930, Service Manual

Page: 21 / 43

Factory Test & Alignment Specification For MT56-AP Series (V1.0)
14
Appendix
Appendix 1: Warm-up Test
Following TCL standard and practices, it’s required minimum
15min of Warm-Up that can be considered
as Burn-In . Additional aging for White Balance alignment is no more necessary due to consistent picture
performance with cloning usage. This function is accessible by selecting “
Factory menu

Warm up
”,
pressing RCU “
Right
” or ”
Left
” key to set it
ON , and then it enter in Warm up mode.
Press “
Menu
” key on
keyboard to exit the burning mode.
Other faster methods are available on above enclosed SIACP
requirements (rev. v3.9).