TCL 30Z, User Manual, Page: 22 / 34

41 42
8
Getting connected������������������������������
To connect to the internet with this phone, you can use 4G network or Wi-Fi, whichever is more
convenient.
8�1 Connecting to the Internet
8�1�1 4G
The first time you turn on your phone with network signal, it will automatically configure your
network service: 4G
(1) .
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
• Swipe up on the Home screen.
• Touch Settings > Mobile network .
• Select
Data roaming
to set roaming mode.
• When Data roaming is disabled, you can still perform data exchange with a Wi-Fi connection
(refer to
"8�1�2 Wi-Fi" ).
8�1�2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within the range of a wireless
network. Wi-Fi can be used on your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Swipe up on the Home screen, then touch
Settings
>
Wi-Fi
.
• Touch the switch to turn Wi-Fi on or off (2) .
• Once Wi-Fi is turned on, detected Wi-Fi networks are listed.
• Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to
enter a password or other credentials (you may contact the network carrier for details). When
finished, touch
CONNECT .
(1) Depending on your network operator.
(2) Wi-Fi is turned on by default when you power on the phone for the first time.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon will appear on the status bar
whenever the phone detects an available wireless network within range. The following steps activate
the notification function when Wi-Fi is on:
• Swipe up on the Home screen and touch Settings > Wi-Fi > Wi-Fi preferences .
• Mark/Unmark the Open network notification checkbox to activate/deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your preference.
• Swipe up on the Home screen and touch
Settings
>
Wi-Fi
>
Add network
.
• Enter the name of the network and any required network information.
• Touch CONNECT .
You can also scan QR code to join Wi-Fi by touching �
When successfully connected, your phone will be connected automatically the next time you are
within the range of this network.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you no longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• On the Wi-Fi screen, touch the name of the saved network.
• Touch
Forget
in the dialog that opens.
8�2 Connecting to Bluetooth devices
(1)
Bluetooth is a short-range wireless communication technology that you can use to exchange data or
connect to other Bluetooth devices for various uses.
To access this function, swipe up on the Home screen, then touch
Settings > Bluetooth > Pair
new device , your device and other available ones will show on the screen.
To turn on Bluetooth
• Swipe up on the Home screen, then touch Settings > Bluetooth�
(1) You are recommended to use TCL Bluetooth headsets, which have been tested and proved
compatible with this phone. You can go to tcl.com/us for more information about TCL
Bluetooth headsets.