TCi VEGA Series, User Manual, Page: 8 / 17

REV. : 2.0.0
SHEET 8 of 17
If default output current is not desired, you may use “Custom Setting” to change output
current. Enter the desired output current value. (1mA for each step)
Function 2:
Set the Dim Function to “0~10V” or “Smart Time Dim”.
a) 0~10V Dim function
Set the min. dimming mode to “Dim to off” or “Min. Dim”.
Check the box for “Dim to off” or “Min. dim” selection, this is subject to customer
application and dimmer capability.
The output level curve can be viewed using the “Show curve” button.
Select the “Custom Setting”
Show Curve
FPD PROGRAMMING TOOL
User Manual
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF TCI
AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE
MANUFACTURE OR SELL OF APPARATUSES OR DEVICES WITHOUT
PERMISSION.