TCi Solo, Manual, Page: 16 / 26

Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Giessen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Page 16 of 26
!
!
CAUTION: Battery may explode if mistreated. Do not recharge, disas-
semble or dispose of in fi re
This device must not be disposed of in household waste in Europe in
accordance with the WEEE regulations.
Used batteries must not be discarded in household waste. Please
dispose of them at your local collection point for batteries!
2.3 Safety Instructions
Explanation of WARNING Symbols
Dangerous voltage: the lightning symbol with an ar-
row at the end, placed within a triangle, indicates non-in-
sulated, dangerous voltage within the product, which may
cause electric shock.
Note: an exclamation point inside a triangle indicates im-
portant operating and servicing information for your device.
Safety instructions [
1)
According to protection class,
2)
building automation systems only]
1) Read these instructions carefully and keep this information in a safe place.
2) Follow all warnings and instructions.
3) Do not use the device near water or moisture.
1)
4) Heed all cleaning instructions. Do not block any ventilation openings.
5) Keep the device free from moisture, excessive dust and heat sources such as heating
elements, heat storage tanks, ovens or other heat-generating devices (including amplifi ers).
6) Do not remove the back cover. There are no parts within the device that require adjustment by
the user.
2)
7) Suitable cabling should only be attached by an electrician.
8) Pay heed to the labeling of the connectors for a correct wiring.
9) Only use cables, connectors, attachments and accessories that are part of the delivery or
specifi ed by the manufacturer. Provided power supplies are only suitable for commissioning
and not for continuous use!
10) Only use built-in boxes specifi ed by the manufacturer, or sold with the device.
2)
11) Disconnect the device from the mains when a thunderstorm is expected or if the device will not
be used for a longer period of time.
12) All repairs should be carried out by trained service personnel only. Servicing may be
required if the device has been damaged in any way, such as power supply cord or
plug damage, liquid has been spilled or objects have fallen into the device, the
device has been exposed to rain or moisture, does not operate normally, or has been dropped.
13) Do not allow any liquids to touch the device, including droplets or sprays. Do not place any
objects with liquid on the device.
1)
14) This manual contains corresponding warnings of electric shock.The device must be mounted
on the wall in accordance with the manufacturer‘s instructions.
15) Wall or ceiling assembly: When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer. Only use the mounting
hardware recommended by the manufacturer. This is an important safety information.
16) An easily accessible disconnector must exist outside of the equipment for this device.
Examples of disconnectors are two-pole switches or circuit breakers.
17) An overcurrent protection device with < 4 A must exist outside of the equipment for this device.
The apparent power of the current source must not exceed 250 VA.
18) Never open the device while it is connected to the mains!
19) The operating voltage of the device may only be within the specifi ed ranges.
20) Avoid different potentials! Local potential differences can cause
undesirable compensating currents, which can damage our systems.
Please check the potential differences between 0V of the power supply at the
power input of the system and the chassis after installation and before commissioning!
If any potential differences are detected, it is necessary to install a equipotential bonding bar
or a cable of suffi cient current carrying capacity between the different potentials, i.e. the cable
cross-section of the conductor must be selected such that the expected compensating current
can be absorbed with safety.
21) The device is not suitable for use in nuclear and explosion-endangered areas.
WARNING
Do not expose the device to rain or moisture in order to prevent fi re or a short circuit.
If the device is transported in cold weather or is exposed to extreme variations in temperature, make
sure that moisture (condensation) does not form on or inside the device. Prior to operation, the unit
must be allowed to slowly adjust to room temperature. Should condensation occur, a delay time of
approximately 12 hours must be allowed before the unit is switched on.
CAUTION: damage caused by improper handling or mounting is not covered by the manufacturer‘s
warranty. The PoE function may be affected by different earthing potentials. In this case, PoE may
not be able to be used. PC systems must be shutted down properly before switching off or discon-
necting it from mains to avoid loss of data.Do not display still images for a long time because it may
cause image sticking effects due to the LCD structure and technology. If you want the display to
show a still image, please use a screen saver or the display off function to avoid the image sticking
effect.
pureKNX-Base7 ONLY: This is a class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take adequate measures.