TCi HarmonicShield Series Installation, Operation And Maintenance Manual Download Page 10

HarmonicShield

®

 

Introduction

 

 

HSD IOM Manual - Rev. D 

TCI Limited Warranty Policy 

 

TCI, LLC (“TCI”) warrants to the original purchaser only that its products will be free from defects in materials and 

workmanship under normal use and service for a period originating on the date of shipment from TCI and expiring at the 

end of the period described below:  

Product Family 

Warranty Period 

KDR, KLR 

For the life of the drive with which they are installed. 

V1K, KMG 

 One (1) year of useful service, not to exceed 18 months from the date of shipment. 

 

HGA 

One (1) year of useful service, not to exceed 18 months from the date of shipment.  The 

warranty for active filters may be extended to 30 months of useful service and 42 months 

from date of shipment with the purchase of an extended warranty and start-up service.  

See active filter warranty policy for details. 

PFG, HGP, HG7, KRF, MSD, 

HSD 

Three (3) years from the date of shipment. 

KCAP, KTR 

Five (5) years from the date of shipment. 

All Other Products 

 One (1) year of useful service, not to exceed 18 months from the date of shipment. 

 

The foregoing limited warranty is TCI’s sole warranty with respect to its products and TCI makes no other warranty, 

representation or promise as to the quality or performance of TCI’s products. 

THIS EXPRESS LIMITED 

WARRANTY IS GIVEN IN LIEU OF AND EXCLUDES ANY AND ALL EXPRESS OR IMPLIED 

WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

 

 

This warranty shall not apply if the product was: 

a) 

altered or repaired by anyone other than TCI; 

b) 

applied or used for situations other than those originally specified; or 

c) 

subjected to negligence, accident, or damage by circumstances beyond TCI’s control, including but not limited to, 

improper storage, installation, operation or maintenance. 

 

If, within the warranty period, any product shall be found in TCI’s reasonable judgment to be defective, TCI’s liability 

and the Buyer’s exclusive remedy under this warranty is expressly limited, at TCI’s option, to (i) repair or replacement of 

that product, or (ii) return of the product and refund of the purchase price. Such remedy shall be Buyer’s sole and 

exclusive remedy. 

TCI SHALL NOT, IN ANY EVENT, BE LIABLE FOR INCIDENTAL DAMAGES OR FOR 

CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF INCOME, LOSS OF TIME, 

LOST SALES, INJURY TO PERSONAL PROPERTY, LIABILITY BUYER INCURS WITH RESPECT TO 

ANY OTHER PERSON, LOSS OF USE OF THE PRODUCT OR FOR ANY OTHER TYPE OR FORM OF 

CONSEQUENTIAL DAMAGE OR ECONOMIC LOSS.

 

 

The foregoing warranties do not cover reimbursement for removal, transportation, reinstallation, or any other expenses 

that may be incurred in connection with the repair or replacement of the TCI product. 

 

TCI will not accept the return of any product without its prior written approval. All freight charges to return any product 

shall be at purchaser’s expense. Please consult TCI Customer Service for instructions on the Return Authorization 

Procedure.

 

 

The employees and sales agents of TCI are not authorized to make additional warranties about TCI’s products. 

TCI’s employees and sales agents oral statements do not constitute warranties, shall not be relied upon by the 

Buyer and are not part of any contract for sale. All warranties of TCI embodied in this writing and no other 

warranties are given beyond those set forth herein.  

Rev. 2/29/2016

 

 

Summary of Contents for HarmonicShield Series






























Reviews: