38
Fault / Remedy
Both buttons flash
alternately = error
Has the capsule holder been inserted?
Place the capsule holder in the machine as described in the ”First-time use
(initial operation)” section.
Is the water tank empty?
Fill the water tank.
If there is not enough water in the cup, press the last button
(without placing a new capsule in the machine ). The brewing process will then end.
Error message during descaling process?
Read the ”Descaling” section.
m
m
m
m
There are coffee grounds in the
cup.
A small residue of coffee grounds always remains at the bottom of the cup.
This is a feature of the system and is not a fault.
Water is dripping out of the
coffee spout.
The water in the system expands as the machine heats up
and as a result a little water drips out of the coffee spout.
The coffee is not hot enough.
Especially in the case of espresso, the quantity of coffee is so small compared with
the size of the cup that it quickly cools down. Preheat the cup by filling it with hot
water and pouring it away shortly before using the cup.
Summary of Contents for Cafissimo PICCO
Page 2: ......
Page 48: ...61482 GS1XMOHBIII ENPL002P ...
