5
1. Make sure that the used capsule con-
tainer is correctly inserted in the front
drawer. The front drawer needs to be
pushed in all the way and the drip tray
correctly inserted.
2. Fill the water tank with fresh, cold tap
water or drinking water up to the MAX
mark.
- To do so, either leave the water tank in
the machine, open the flap on top of the
water tank and pour the water in through
the tank’s filling inlet, or...
- ... pull the water tank straight up and out
of the machine and then fill it with water.
When you reinsert the water tank into the
machine, push it down as far as it will go.
3. The lever must be in the down position.
Fold it down if necessary.
4. Place an empty cup beneath the coffee
spout.
MAX
Initial operation — prior to first use
5. Plug the mains plug into an easily acces-
sible wall socket.
6. Press the On/Off button.
A short signal will sound. The On/Off
button and coffee buttons flash.
7.
Press the yellow coffee button
.
The pump starts to operate. As soon as
the pipes are filled with water the pump
stops automatically. A small quantity of
water runs into the cup beneath the
spout.
The On/Off button and coffee buttons
flash and the machine heats up to brew
coffee.
8. Pour away the water that is in the cup and rinse the machine twice as
described in the section “Rinsing the machine”. The machine is then ready
for use.
