TCC URC2060 Manual Download Page 4

Page: 4 / 6

“Autoprogram” Instructions To Search For Correct Code:

Turn on the TV and follow the steps below to search
through all codes.

Be sure to point the remote at your TV during setup

1. Press and hold SETUP until the LED blinks twice

2. Press the TV POWER key.

3. Aim the remote at your TV and press and hold down the
OK key.

4. Release the key when the TV turns off and setup is
complete

Summary of Contents for URC2060

Page 2: ... TV brand in the charts below Press and hold the corresponding digit key while aiming the remote at your TV Codes 1 Insignia Dynex 6 Samsung 2 LG Zenith 7 Sharp 3 Mitsubishi 8 Sony 4 Panasonic 9 Toshiba 5 Philips Magnavox 0 Vizio 4 Release the key when the TV turns off and setup is complete ...

Page 3: ...t the remote at your TV during setup 1 Press the TV POWER key 2 Press and hold SETUP until the LED blinks twice 3 Using the digit keys on the remote enter the first code shown in the code list at the end of this guide 4 Test the remote to confirm that it controls your TV as expected If it does not try again using the next code listed ...

Page 4: ...ps below to search through all codes Be sure to point the remote at your TV during setup 1 Press and hold SETUP until the LED blinks twice 2 Press the TV POWER key 3 Aim the remote at your TV and press and hold down the OK key 4 Release the key when the TV turns off and setup is complete ...

Page 6: ......