TMN-5000i-V1
TMN-5000i Hardware User Manual (Ver.1)
6
5
TMN-5000i Key Features and Specifications
Hardware Features
No. of Digital Inputs (Dry contact or
TTL)
8
No. of Digital Outputs (Open collector
drive)
8
Power Adapter
(240V 0.6A) AC/DC (12V 2A)
Real Time Clock
Yes (CR2032 battery is included)
On-board Modem
Cinterion EHS5-E
Antenna Interface
SMA (50ohm) female
Backup Battery
3.7V, 2000mAH (Min 4 hours excl. external devices)
Programming Cable
DB9 female to RJ12 male converter
Firmware Features
Wired Configuration (RS232)
Yes
Wireless Configuration (SMS)
Yes
No. of Mobile Users to Alert
16
Types of Languages Support with SMS
All supported languages in SMS (max 70 characters)
Power Failure & Battery Low Detection
Yes
I/O Configuration
Yes (Normally Open or Close; Toggle ON/OFF)
Sub-Node Inputs Expansion (RS485)
Max 16 TMN-10 modules for max 128 inputs
Software Features
Weekly Schedule
4 user-defined schedules to alert users
on different shifts
User-defined Message
Yes (max 40 characters)
Resend SMS Alert
Yes, resend by count and interval
“Back to Normal” Alert
Yes
Alert Escalation Levels
4
Health Test (to Mobile Users)
Power fail, Battery weak, RS485 fail,
Sub-node missing
Health Test (to CMS)
RF signal strength, Data synchronization, I/O status
Electrical Specifications
Operating Voltage
6-32VDC
Current - Transmission
- Standby
(Note: exclude external devices)
220mA@12VDC
120mA@12VDC
Mechanical Specifications
Operating Temperature
-25 to +75°C
Dimension (mm)
183 x 183 x 22
Weight
335g
Mounting
Wall or Desk
Casing Material
Polycarbonate Plastic
