T8000-I smart gateway user manual
Page 24 of 25
Upon login, go to Setting->Network Tab, you will see the network settings page.
Locate an IP address in Local LAN that is not in used.
Set T8000 Static IP Address to the unused IP Address and set a Gateway IP Address.
Click “Save All” when done.
Repeat the above steps to ensure IP have been changed before connecting T8000 to local
LAN network.
II.
Reset T8000 network to default
1.
Power off T8000 and open up the casing
2.
Power on T8000 and wait 10 seconds
3.
Press and hold button S2 till NET, I/0 and ALM led lights (takes about 20 seconds)
4.
T8000 will be loaded with default network settings, refer to Appendix on Connecting to
T8000 for the first time to set up network.
NET
I/O
ALM
S2
NET
I/O
ALM
