TCA PR56TC10-BK, Instruction Manual

Page: 6 / 8

OPERA
TION
RaISE anD RELEaSE DRaWER FRonTS
These units are equipped with the raise and release
drawer fronts. To open, lift up on the drawer front while
pulling towards you. To close, shut the drawer firmly until
the latch engages.
If the drawer does not stay closed, the hook may be bent,
or it may be rubbing against the drawer slides. To fix
this problem, lightly bend the hook until the drawer will
engage in the slide.
Lift
REMoVInG DRaWERS
To remove a drawer, pull the drawer out so it’s almost
fully extended. Push up on the black release lever on one
side, while pulling down on the black release lever on
the other side. While holding the levers in the positions
as instructed above, pull the drawer outward until it is
released from the drawer slide.
REPLaCInG DRaWERS
Extend the drawer slides from the tool chest or cabinet.
Insert the brackets on each side of the drawer into the
slots in the slides, being careful that they are properly
positioned. Once properly inserted, completely close the
drawer to set the slides in their proper positions.
Push up (one side)
Push down (other side)