16
/
ASSIMILATOR
ENGLISH
7.
Save your analysis curve as “My Song” or whatsoever from the File menu of the
Target section.
8.
Now, in the Reference section you have the analysis curve of the “professionally”
mastered song, and the Target section has the analysis curve of your track.
9.
Begin playback of your track, and begin moving the “Apply” fader to the right
until the overall equalization sounds good to you.
10.
Once you have found an apply setting that you like, you can “bounce” your new
mix to disk as a new audio file.
11.
If you want to edit the overall EQ curve, this can be done in the reference curve
using one of the draw tools. Editing the reference curve will adjust the EQ
curve that is applied to the target audio.
MORPHING
You are mastering a rock tune. You want the intro and the verse to have a Lo-Fi
sound – as though it is coming from an AM Radio – but you want the bridge to
transform into a High-Fidelity sound as it approaches the chorus. By the time you
reach the chorus, you want the song to have completely High Fidelity equalization.
With ASSIMILATOR, this is easy to accomplish.
1.
Make sure that the “A” view is visible.
2.
“Learn” a Low Fidelity audio mix in the Reference section or use one of the
included “Lo-Fi” presets.
3.
When the Low Fidelity song has completed playback, press “Learn” again to
disengage the Learn function.
If you want to recall this analysis curve at a later time, save the analysis curve
as “Lo Fi” or whatsoever from the File menu of the Reference section.
4.
“Learn” the analysis curve for your mix in the Target section.
5.
When your song has completed playback, press “Learn” again to disengage the
Learn function.
6.
Save your analysis curve as “My Hit Song” or whatsoever from the File menu of
the Target section.
7.
Now that you have the “Lo Fi” as your reference and your mix as the target, switch
to the “B” view by selecting the “B” View tab.
8.
In the Reference section of the “B” View, “Learn” a High Fidelity track you would
like your chorus section to sound like.
9.
From the File menu in the Target section, load the analysis curve “My Hit Song”.
10.
Once you have a complete range of settings in both the “A” and “B” views, switch
to the Morph view by selecting the “Morph” view tab.
