background image

Introduction

Welcome to VoiceSoloP XT

The TC-Helicon VSM range of near field live monitoring
speakers is a new concept in personal monitoring. TC-
Helicon strives for excellence in all things related to vocals,
and the VSM range builds upon the success and worldwide
reputation of  TC-Helicon's vocal expertise.   

If you can't hear yourself correctly in a live situation, it's
hard to produce a good performance.  VSM monitors are
designed to integrate into a boom-style microphone stand
bringing the speaker close to the performer. This yields a
wide range of benefits over existing wedge-type or in-ear
options such as: 

•  Lower monitor bleed into the main PA sound
•  High volume level before feedback
•  Better interaction with audience; stage space is

reclaimed from floor wedges and ear plug barriers are
not required as in in-ear monitors.

The VSM monitors use a two-way point source ICT ™
driver that eliminates the problem of hearing separated
high and low frequencies which happens when listening to
conventional speaker systems.  This is especially important
when used on a microphone stand as the speaker is
located very close to the listener and the separation would
be more evident.

VSM-200P XT Features:

• Improved high frequency response in the critical 4 to 10

kHz range resulting in higher accuracy and smoother
sound.

•  Quick mic stand set up. Integrates with boom so the

same stand is used for the monitor and microphone.

•  Versatile placement options provided by dual stand

mounting holes and dual bevelled edges for floor
mounting.

•  Two-way point source 6.5" ICT™ driver for optimal near-

field live monitoring.

•  High power capacity: 240W peak
•  Cast aluminum enclosure for maximum rigidity and

minimum cabinet resonance

•  Front panel mounted volume control for easy access.

About TC-Helicon

TC-Helicon’s core value is that the voice is the world's
most beautiful instrument. Therefore, everything TC-
Helicon does is dedicated to this instrument. TC-Helicon
envisions a world where those who work with voice are
able to bring out its very best and where the possibilities
of vocal craft are endless.

The company's mission was galvanized by a simple
question, "Isn't it time that someone finally provided
dedicated tools and solutions for voice?"

TC-Helicon is revolutionizing the vocal channel by
providing innovative tools and solutions for people who
create and work with the speaking and singing voice.
Our customers include the most demanding of live
performers, producers, broadcasters and recording
engineers.

Enjoy!

The TC-Helicon Team

a TC Group company

Summary of Contents for VSM-200P XT















Reviews: