background image

b

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on its
own responsibility that the following product: 

VoiceSolo VSM-200  - Active Voice

Monitor 

- is covered by this certificate and marked
with CE-label conforms with following
standards:

EN 60065

Safety requirements for mains 

(IEC 60065)  operated electronic and 

related apparatus for household
and similar general use

EN 55103-1  Product family standard for 

audio,video, audio-visual and 
entertainment lighting control 
apparatus for professional 
use. Part 1: Emission.

EN 55103-2 Product family standard for 

audio, video, audio-visual and
entertainment lighting control 
apparatus for professional 
use. Part 2: Immunity. 

With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC

Issued in Risskov, 05 - 2006

Mads Peter Lübeck

Chief Executive Officer

EMC / EMI.

This equipment has been tested and found to comply with the
limits for a Class B Digital device, pursuant to part 15 of the FCC
rules.

These limits are designed to provide reasonable protection
against harmful interference in residential installations. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on. The user
is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

For the customers in Canada:

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for VOICESOLO VSM-200

















Reviews: