background image

6 Thk + Arena - Thicken plus long arena reverb
7 Arena - Arena reverb only 

5 Output - Configures the outputs for stereo or mono.

Stereo - (default) Set when using the Left and Right 1/4” TRS jacks 
into a stereo PA.
Mono - Set when using the single XLR output jack only.
Dual Mono - Allows independent external mix control of mono wet 
guitar and mono wet vocals. Mono vocals with effects are produced 
from the Left TRS output and mono guitar plus effects are produced 
from the Right TRS output.

6 USB - Configures USB input and output.

Stereo - (default) USB input audio from a computer is mixed directly 
to the main outputs of Touch. USB output of Touch is stereo mix of 
all effects and guitar plus its effects.
Track - USB input is same as Stereo above. USB output configured 
to send dry voice (left) and guitar (right) while analog outs produce 
normal stereo output for monitoring while performing parts. 
Insert - USB audio input is optimized for processing external vocal and 
guitar tracks. USB left input expects dry voice for harmony and effects 
processing. USB right input expects dry guitar or chordal instrument 
audio for harmony control. USB output is same as Stereo.

7 Tap Gbl - Tap Tempo Global control. Determines whether a tempo 
you have tapped-in via the Delay button sets all presets to the same 
tempo (On) or each preset or favorite uses its own stored tempo (Off).
8 Key/Scale Gbl - This parameter determines whether a key and scale 

you have entered in the Harmony edit menu will apply to all presets 
(On) or each preset may have a different key and scale (Off).
9 Nat Play Gbl - (Naturalplay Global Control) Determines global device 
for harmony control.

Off - Favorites can be stored with a unique Naturalplay control 
device setting in their Harmony edit menu. Thus, one Favorite could 
be controlled by a guitar and another could be controlled by MIDI.
Auto - Harmony control device is determined dynamically depending 
on which device is connected.
Guitar - Global harmony control device is from Guitar input jack only.
MIDI - Device connected to MIDI In jack or via USB controls harmony.
Aux - Input from Aux In jack or via USB controls harmony only.
Scale - A fixed key and scale controls harmony in all presets and 
Favorites.
Shift - Sets global harmony to Shift mode.

See also the Naturalplay parameter in the Harmony edit menu.
10 Pedal - Configures the optional Switch 3 footswitch using styles.

1 Harmony/Favorite/Loop
2 Loop/Stop/Undo+Redo
3 Loop/Left button/Right button
4 Talk/Banks/Favorite
5 Harmony/Banks/Fav

Basic Operations

14

Summary of Contents for VOICELIVE Touch


















Reviews: