TC-Helicon voicelive rack User Manual Download Page 48

Page: 48 / 89

MIC-CONTROL Tab Overview

This tab allows Mic-Control from a TC-Helicon

MP-75 mic to assigned globally. You can assign

a single parameter such as Tempo for example

to the mic switch and this will not change over

different presets. The settings in this global MIC-
CONTROL menu are almost identical to the

one used in the preset Edit menu except that

GLOBAL MIC-CONTROL replaces the FUNC

TION parameter.

CONTROL

When turned to ON, this enables effect control

from the mic. The front panel Mic-Control button
can similarly be used when the MIC-CONTROL
setting is set to COPY MIC SWITCH.

Note that this will also turn on phantom power

in VoiceLive Rack if it is not already active. To

avoid unexpected audio pops, mute your mixer

first. Setting CONTROL to OFF does not de-

activate phantom power.

GLOBAL MIC-CONTROL

When set to OFF, this reverts the Mic-Control
target to whatever is assigned in the individual

presets. The target list is the same as when global

Mic-Control is off except for the addition of the
OFF setting.

•   OFF
•   HARMONY MOMENT
•   DELAY MOMENT
•  HARDTUNE MOMENT
•  TRANS MOMENT
•  REVERB MOMENT
•  UMOD MOMENT
•  DOUBLE MOMENT
•  RHYTHMIC MOMENT

•  HARMONY
•  DELAY
•  HARDTUNE
•  TRANS
•  REVERB
•  UMOD
•  DOUBLE
•  RHYTHMIC
•  HARMONY HOLD*
•  TEMPO
•  CHOIR
•  PITCH
•  BYPASS
The MOMENT functions will only activate the

effect while the button is held. All other functions
will remain on or off after tapping the Mic-Con-
trol button.

* Harmony Hold is a feature that sustains the last
harmony syllable indefinitely as you hold the Mic-

Control button.

MIC-CONTROL button

This setting affects the function of the front panel
MIC-CONTROL button. This button can be
configured to mimic the response of the MP-75

thumb switch or to directly access the MIC-

CONTROL editing tab.
Setting this to COPY MIC SWITCH allows a
quick check of the MIC-CONTROL function as

you will see the target assignment’s button light

e.g. Harmony. When set to HOLD TO EDIT, hold

ing the MIC-CONTROL front panel button will

display the appropriate edit tab in the display.

The Setup Button

Summary of Contents for voicelive rack


























































































Search results

Summary of Contents for voicelive rack

Reviews:

Related manuals for voicelive rack

Brands by name

Popular brands

TC-Helicon voicelive rack, User Manual

Search results

Summary of Contents for voicelive rack

Reviews:

Related manuals for voicelive rack

Brands by name

Popular brands