TC-Helicon PERFORM-VE Reference Manual Download Page 3

Page: 3 / 37

Connection Diagram

Perform-VE has a lot of connectivity:

•

MIDI data is received via the mini-USB port or the 5-Pin MIDI Socket.

•

MIDI data is transmitted via the mini-USB port.

•

The PEDAL input allows you to connect a Switch-3 or Switch-6 (sold separately) to change presets, toggle

effects and control the LOOPER and SAMPLE features.

•

The AUX input lets you mix stereo audio tracks with Perform-VE’s output.

•

The balanced stereo outputs allow connection to any ¼” input equipped mixer or powered speaker

system.

•

The XLR input is a MIDAS microphone preamplifier, providing the much-loved MIDAS soft clipping

characteristic sound when pushed hard.

For learning purposes, we recommend that you connect a MIDI keyboard to your Perform-VE while you track

along with this reference manual. Your MIDI keyboard will ideally be connected directly to Perform-VE’s 5-Pin

MIDI port as shown above.

Alternatively, your MIDI keyboard can be connected via USB cable to a laptop running music software that

features a MIDI soft THRU capability. You would then connect Perform-VE to the laptop via a second USB cable

and configure your DAW to take incoming MIDI from the USB MIDI keyboard and pass it on to Perform-VE’s USB

port. See your respective software manual for details on how to set up your particular system.

Summary of Contents for PERFORM-VE






































Search results

Summary of Contents for PERFORM-VE

Reviews:

Related manuals for PERFORM-VE

Brands by name

Popular brands

TC-Helicon PERFORM-VE, Reference Manual

Search results

Summary of Contents for PERFORM-VE

Reviews:

Related manuals for PERFORM-VE

Brands by name

Popular brands