Harmony Processor Notes
24
Some of the harmony processor products supported
by HarmonyControl have special requirements. Below
are helpful tips for their operation.
VoicePro:
The CC Assign map in the Utility section needs to be
adjusted. before Scale harmony will work. Start with the
Default style. Scroll down until you see CC30 in the
right column. Adjust the Controller 4 soft knob clicks
clockwise so the controller is set to Harmony Key. Now
set the controller following it, CC31, to Harmony Scale.
Quintet:
1. While this is an auto-compatible processor, its MIDI
channel needs to be set manually in its Setup menu (not
HarmonyControl’s) in order to work.
2. When using Quintet in Scale mode, the presets that
work for most songs have the Maj2 variation.
3. Pressing the Key button will show SL in the display
meaning “Scale Learn”.There is no Scale Select feature
in Quintet and therefore you won’t see the S2 display
shown with other products.
4.When you change presets on Quintet, you will briefly
see “Preset Dumped” in its display.This is normal.
Digitech® Products:
1. If HarmonyControl has previously detected a different
processor, it will need to be reset (hold On button during
power up) to detect your current processor.The product
ID will show a moment after power up.
2. If it seems the harmonies don’t change correctly as they
did at the beginning of your power up session, simply
power your harmony processor off and then on again.
3. If a chord you are playing is not recognized by your
processor, it may be that this chord is not available in the
current preset. Either choose another preset or edit the
current one to include this chord.
4. Manuals for many of these products are located at:
http://www.digitech.com/Downloads/discontinued.php
at the time of this printing.
Summary of Contents for HarmonyControl
Page 1: ...PRODUCT MANUAL ENGLISH VERSION ...
Page 5: ...6 ...
