GO VOCAL
High-Quality Microphone Preamp
for Mobile Devices
Install a 9 V battery by sliding off the rear cover.
Plug the attached cable into your device’s
headphone input or lightning adapter.
Plug a pair of headphones into the
headphone input.
Connect a microphone via XLR cable.
Move the Power switch to the ON position.
If you have connected a condenser microphone,
select the +48 V position to supply phantom power.
The 48 V LED on the front panel will light red.
While speaking into the microphone, turn up
the GAIN wheel. If your voice distorts when singing
or speaking loudly, turn the GAIN control back down
a bit.
Download your favorite TC Helicon app to begin
experimenting with vocal effects.
Left
Right
Ground
Mic
Quick Start Guide
(EN)
Getting started
V 1.0
