![background image](http://html1.mh-extra.com/html/tc-electronic/tc-stereo-chorus-flanger/tc-stereo-chorus-flanger_user-manual_3959413006.webp)
11
4 WIDTH
Determines how wide a modulation
(sweep) is produced. Ranges are
from "0" (no modulation) to "6"(max) on a
relative scale.
5 INPUT GAIN
Controls the gain of the built-in
preamplifier. Ranges from 0dB
(no amplification) to +15dB (= 5 times
amplification).
6 OVERLOAD
Indicates when the TC SCF is close to
being overloaded. Adjust for
occasional peak indication.
7 INPUT JACK
High impedance input. Connect your
instrument here.
8 OUTPUT (MONO)
Outputs a monophonic effect signal or, if
both outputs are used, the left channel of
the stereo signal.
FRONT DESCRIPTION
10
1 SPEED
Controls the Rate of sweep in a range
from 1 sweep every 10 seconds to 10
sweeps each second (0,1-10 Hz).
2 INTENSITY
The INTENSITY potentiometer has 3
functions - one for each mode:
-
In the CHORUS mode it blends
between chorus and clean signal.
-
In FLANGER mode it controls the
strength of the Comb filter phasing of
the signal (like feedback on a delay).
-
In PITCH MODULATION mode it is
blend control, mixing chorus and
vibrato.
3 MODE SELECTOR
Switches between the 3 modes of
operation: CHORUS, PITCH
MODULATION (P.M.) and FLANGER.
FRONT DESCRIPTION