15
Note:
If both outputs are used for stereo, you must use a stereo
return on the mixing console. Do not mix the stereo outputs of
the TC SCF together! If you do, you will get no effect, as the
effects part of the signal is out of phase on the LEFT/RIGHT
OUTPUT.
SETTING SPEED AND WIDTH
The SPEED and the WIDTH should be regarded as a
set of controls rather than two individual. They both
influence the apparent degree of effect. A good
starting point when creating more "pleasant" sounds
in any of the 3 effect modes is to keep the controls
"generally opposite". Here is an example:
SPEED at "2", WIDTH at "5" or
SPEED at "5", WIDTH at "1".
THE CONTROLS
