background image

3 – REMOTE IN

Use the REMOTE IN jack to connect the RH450 to the optional
footswitch-remote “RC4”.
The RC4 gives you access to the three memory locations, the
mute function, and has tuner indication as well.

The RC4

4 – DIGITAL OUT

Use the DIGITAL OUT jack to connect the RH450’s digital output
stage directly to a digital audio device, such as a computer’s
audio interface. This way, you can record your bass sound
straight into Pro Tools, Logic or any other DAW application. The
digital output signal is in 96 kHz/24 bit AES/EBU format. This
ensures the highest possible resolution and quality of your
recorded bass signal. To determine where in the signal chain the
signal for the digital output should be tapped, use the
PRE/POST switch located right beside the LINE DRIVER OUT
jack on the RH450’s rear panel. Your bass signal is present on
both Left and Right digital channel.

Setting up for recording:
In order to record straight from the RH450’s digital output, follow
these steps:

Connect the RH450’s DIGITAL OUT jack to your DAW.

Set your DAW to follow (slave to) “external clock”.

Hit the record button in your DAW and start playing.

SPDIF Compatibility

While a simple XLR to RCA converter may suffice to allow
recording through an SPDIF interface, please note that AES/
EBU and SPDIF have different level and impedance specifications,
which in some cases can cause compatibility problems.

If you want to record with an analog signal instead, you
may also use the RH450’s balanced output signal from
the LINE DRIVER OUT jack.

5 – AUX IN Rehearse – Stereo Rehearsal Auxiliary Input

Any signal present on the stereo AUX IN jacks is played back
through the PHONES output on the front of the RH450. This
allows you to play along with a rehearsal track when checking
out new stuff or to practice to a beat or just a metronome click.
The included “Mini jack to RCA” cable allows you to use iPod®,
iPhone® or any other consumer playback device as a source for
rehearsing.

OPERATION – REAR PANEL

15

EN

Summary of Contents for RH450























Reviews: