SETUP EXAMPLE: MONO + DUAL PROCESSING
5
In this setup, the two engines can be used
individually or serially. You can use two
compressors, two noise gates, or one of each at
the same time.
•
Connect your guitar to input A of the NOVA
Dynamics.
•
Connect output A of the NOVA Dynamics to
the input of your guitar amp.
•
Activate engine A and/or B and select the
desired compression type and/or noise gate
algorithm.
•
That’s all!
Note: For best signal to noise ratio, calibrate the
pedal according to the level of the input signal.
For further information, refer to this manual’s
“Calibration” section.
