TC Electronic Finalizer, User Manual

Page: 33 / 46

33
COMPARE
Compare
The reason for adding this compare function is that it can be difficult to estimate what the EQ/dynamics is doing to the sound of your mate-
rial. Because of the extra gain of the Normalizer and the compressor in-circuit and out-of-circuit comparisons are often difficult to make
using the BYPASS key.
That is why we made it possible to reduce the level of your processed setting when comparing it with the bypassed sound. You can even
compare with the last recalled preset.
Press the COMPARE key and use the ADJUST wheel to lower the level of your setting.
Then use the PARAMETER keys to compare these different sounds: one, the original; two, your edited preset; or three, the bypassed sig-
nal.
Listen to original preset
If you place cursor here, you will hear
the original preset.
Listen to your edited sound
If you place the cursor here, you will
hear the edited sound.
Use the ADJUST wheel to adjust this
level for better comparison with the
bypassed signal.
Bypassed signal
Same function as the BYPASS key.