6
Classic S Parametric EQ
Classic S Parametric EQ
7
OPERATION
Audio Connections
Input
- 1/4” connection for input signal. Connect your guitar here.
Output
- 1/4” connection for output. Connect the output to your amp.
Controls
Sustain
- Sets the amount of sustain.
Freq Center
- Sets the center frequency to be attenuated or boosted by
the Function control.
Function
- From notch filter type to peak filter type.
Notch filter type
Peak filter type
OPERATION
Notch settings will attenuate frequencies around the Freq Center. Peak
settings will emphasize the selected frequency area.
High Q
- The “Q” value switch allows you to alternate between two
different curve-widths. If you are looking to attenuate an annoying
frequency you should most likely use the notch filter type with a narrow
Q (out position). If, on the other hand, you are aiming to make general
adjustments in a frequency area, the wider Q setting should be used (in
position). Experiment.
Output Level
- Controls the overall output level of the pedal.
Noise Gate
- The Classic Parametric EQ comes with a built-in
noise gate that can eliminate unwanted noise deriving from pedals
placed previous in the signal chain or noise coming from the Classic
Parametric EQ itself when extreme settings are used.
The single control adjusts the Threshold point. Attack and Release
parameters have fixed settings based on common applications.
