TC Electronic Classic 450, User Manual, Page: 7 / 16

If you just can’t wait…
Here are a few quick steps to get you playing within minutes.
Unpacking
• Unpack your Classic450 amp.
• The box should contain the following items:
–
Classic450 amplifier
– Power Cable
– Manual
• Inspect all items for signs of transit damage. In the unlikely
event of any damage, inform the carrier and supplier.
• In case of damage, keep all the packaging, as this will show
evidence of excessive handling force.
• It is also a good idea to keep the packaging for future
transportation.
Setting up
• Connect the Speaker Out jack of the amplifier to your
cabinet using a Speakon speaker cable. RS cabinets come
with a speaker cable included, so if you have bought a RS
cabinet, you are all set to go.
• You can connect up to three RS cabinets or any other two 8
Ohm cabinets of another brand to the amplifier. The
minimum load is 4 Ohm.
• Connect the power cable and power up. The Classic450’s
power supply accepts voltages from 100 to 240 VAC.
• Connect your bass to the input jack on the front panel.
• Adjust the input gain using the GAIN knob.
• Adjust the output volume using the MASTER knob.
• Play!
Accessories
The following items can be purchased from your music dealer:
•
RS cabinets 210/212/410
• 19" bracket (allowing you to mount the amplifier in a
standard 19" rack)
• Classic450 soft bag
• Classic450 flight case
• Flight cases for RS cabinets.
Be sure to check www.tcelectronic.com for latest news about
these and other TC products.
QUICK SETUP GUIDE
5
EN