Protection mode
16
Protection mode
This product is equipped with an advanced protection
system for both the amplifier’s and your own safety.
These protection features should only kick in if you op-
erate this product under extreme conditions.
Be sure not to cover the BH250 / BG250-208 cooling
grid!
Insufficient ventilation may cause the amplifier’s
temperature to increase to critical values.
The BH250 / BG250-208 is equipped with an intelligent
protection system, ensuring that the amp does not suf-
fer or malfunction if operated wrongly or in extreme en-
vironments. When the amplifier switches to Protection
mode, the speaker output is muted, and the TUNER
LEDs start flashing in pairs of two.
Protection mode is invoked…
■ if a short circuit occurs (on speaker outputs).
■ if the amplifier is used in an environment that is too
hot.
■ if proper ventilation is not ensured.
■ if the combined impedance of the internal speaker
and an attached speaker is below 4 Ohms.
In Protection mode, the speaker outputs are shut off to
prevent speaker damage. However, the balanced out-
put still passes audio.
Summary of Contents for BH250
Page 1: ...BH250 BG250 208 English Manual...
Page 2: ...TC Electronic BH250 BG250 208 English Manual 1 0...
Page 4: ...Table of contents b...
Page 24: ......