background image

   

2

  

TC8926 Rev 1.0      User Manual

All Rights Reserved
Copyright © 2019 by TC Communications. Products described in this publication are protected 
by one or more U.S. and foreign patents.

Trademarks

The TC Communications® logo is a registered trademark.

JumboSwitch® is a registered trademark of TC Communications.

Other product and brand names may be trademarks or registered trademarks of their respective owners.

Documentation Disclaimer

This document is provided “as-is” and is to be used only as a general guide. TC Communications disclaims all 
warranties, express or implied, regarding the accuracy of the information. TC Communications shall not be liable for 
any indirect, special, incidental, or consequential damages (including damages for loss of business, loss of profits, 
loss of business information, business interruption or other pecuniary loss) arising out of errors in this document.

The information given in this document is reviewed regularly and any necessary corrections will be included in 
subsequent editions. We appreciate any suggested improvements. We reserve the right to make technical 
improvements without notice.

Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized 
except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the 
purposes of patent application or trademark registration. This document contains proprietary information, which is 
protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or 
translated to another language without the prior written consent of TC Communications.

Record of Revisions

Revision

Date

Description of Changes

1.0

05/09/19

Initial Release of TC8926.

TC Communications
17881 Cartwright Road
Irvine, California U.S.A. 92614
Tel. (949) 852-1972
Fax (949) 852-1948
E-Mail: sales @tccomm.com
Website: tccomm.com

Summary of Contents for TC8926






















Reviews: