TC Communications TC8518 T1, User Manual, Page: 81 / 108

TC8518 Rev 2.2 User Manual 5-1
Chapter 5 SNMP Management
5.1 Introduction
The TC8518 comes standard with built-in SNMP Agent. Contact TC
Communications Technical Support to get a copy of the MIB file. The TC
Communications MIB file can be run on any 3rd party SNMP Management
Software. Trap IP must be defined by the user and the MIB file compiled by SNMP
Manager software prior to the trap operation.
5.2 SNMP Query
Figure 5-1, SNMP Query Response shows an example of a SNMP management
station. This figure illustrates a SNMP Query of a TC8518. In this illustration, the
Query shows that all T1 alarm statuses are off.
Figure 5-1 SNMP Query Response
5.3 SNMP Third Party Management Software
Figure 5-2, Third Party SNMP Manager shows an example of the TC8518 SNMP
being managed with a third party vendor software.