TC Communications TC1920, User Manual

Page: 81 / 89

Chapter 5 Troubleshooting Software
TC1920 Rev 1.3 User Manual 5-12
5.5 Software
The Management through the Web chapter defines and describes on each
screen in GUI the parameters, options, buttons and commands. This section
has information on diagnosing and repairing the unit.
5.5.1 Default Software Configuration
The quick-start chapter describes how to perform the TC1920 unit initial
setup in a typical network application. This includes software
configuration.The default software configuration is detailed in the tables
shown in
Default Software Configuration, on page 1-7.
If Then
The LED is green. Proceed.
The LED is off. This indicates;
• a problem with the power source
• a problem with the power supply or the connector
• the power supply port is unused.
Please see Power Supplies, on page 5-11.
NOTE TC Communications provides software upgrades to ensure
improve performance, adding new features, and correct
problems (bugs). Please refer to the documents that are
included in your documentation package for complete details for
your software revision. The upgrade procedure is in
Firmware
Upgrade, on page 5-11.