---8 / 9
---
Matrix – Get Started Guide V2.0
Switch to another operating system
Matrix runs MatrixTV system by default, if you want to switch to another operating system, you need to
burn a new OS
3
intos the eMMC on the board. In order to burn the new OS into eMMC, you are going to
need:
1x PC
1x USB mini cable (Type: mini B)
Download the OS image files from the download section of our website to your PC, and then follow a
few steps below:
Move the “Burn/Run“ switcher on the board to the “Burn” side.
1.
Connect one end of the USB mini cable to the OTG port on Matrix, the other end to the USB port
of the PC.
2.
Open the software “MfgTool2” in the folder, where the OS image files are inside, click “Start”,
and wait a few minutes until it’s completed.
3.
Power off Matrix.
4.
Move the “Burn/Run“ switcher on the board back to the “Run” side.
5.
Power on to let Matrix restart, now it can run the new OS you have just burnt into eMMC.
How to burn a new OS into eMMC on Matrix?
Matrix can run Android, Linux and many other operating systems. In order to burn the new OS into
eMMC, you are going to need:
1x PC
1x mini USB cable (type: mini B)
Download the OS image files from the download section of our website to your PC, and then follow a
few steps below:
6.
Move the “BOOT/UPDATE“ switcher on the board to the “UPATE” side.
7.
Connect one end of the USB OTG cable to the OTG port on Matrix, the other end to the USB port
of the PC.
8.
Open the software “MfgTool2” in the folder, where the OS image files are inside, click “Start”,
and wait a few minutes until it’s completed.
9.
Power off Matrix.
10.
Move the “BOOT/UPDATE“ switcher on the board back to the “Start” side.
11.
Power on to let Matrix restart, now it can run the new OS you have just burnt into eMMC.
3
The OS images can be found in the download section of www.tbsdtv.com
