Powering up
Getting set up and ready to fly is a quick and simple task. In most cases plug&play when using TBS
equipment.
Power up
Press and hold the Power-button for half a second to turn on the remote. The TBS TANGO screen will
welcome you and the power button starts to flash green.
Factory mode
Press the Power-button and Down-button for 2 seconds to enter the factory mode (not factory reset), a
confirmation tone will sound. This is where you can calibrate control inputs, change test settings, read ADC
and PPM values, and change LCD display settings.
No-JR Module mode
Press the Power-button and Scan-button for 2 seconds to disable JR module power, a confirmation tone will
sound. This is handy when you want to conserve battery while watching your friends fly.
PitMode
Press the Power-button and Rocker-button for 2 seconds to enter the PitMode, a confirmation tone will
sound. This will set the video receiver to 5584 Mhz, which is the TBS PitMode frequency. For more
information about PitMode, please consult the TBS UNIFY PRO manual.
7
