www.tbsdtv.com
12
Open WUI by entering the default IP adress192.168.1.188 (or your own MOI IP address
after
you’ve changed it) in the browser, go to “Update”, select and upload the files to
proceed with the update.
Note
:
this method applies only to MOI with firmware version 1.2 or later; for MOI with
firmware version 1.0 and 1.1, update through a micro SD card is the only method
.
4.3. Restore To The Default Settings
To perform a reset, power off MOI, then use a pen tip or bent paperclip to depress the reset slot
and at the same time power on MOI, keep depressing until MOI is powered on.
4.4. Set up RS232 connection
NOTE:
This connection is not a MUST, it is only recommended for those who want to add or edit the
imbedded software on MOI.
Connect MOI through RS232 slot with your PC.
Run Tera Term software to configure, as it is shown in the picture below:
login: root
pass: tbs
