BlackSheep Telemetry ports (2xBST)
There are two BST ports on the left side of the unit. These can be used to connect a range of compatible
modules for the TBS CORE PNP PRO to provide telemetry data. This modular system allows you to custom fit
your model depending on your exact needs and weight budget. The pin-out is the same for all BST modules.
BST - Digital Current sensor
The current sensor comes with a protective plastic casing (the photo above is from the prototype). It is rated
for maximum 100A, which should cover even the biggest aircrafts. The sensor’s digital interface provides the
most accurate current sensing yet. A blue light indicates that battery power is connected. In addition to current
sensing, it supplies power to the main unit (voltage regulators).
The module comes with XT60 male/female connectors to make it easy to put in-line between the model and
battery pack. The connectors can be replaced with any connector or wire, if preferred.
10
