TBS CORE PNP PRO
The all-in-one FPV power supply and
flight OSD
Revision 2014-06-16
The TBS CORE PRO is the progression of our
TBS CORE PNP system. It now supports GPS to
help navigation and a new range of TBS
telemetry modules to take your FPV experience
to the next level. We are leveraging some of the
same core components we used in the earlier
CORE series and our TBS DISCOVERY PRO
multirotor. Making this the most advanced CORE PNP system available. It also comes with the same
easy-to-connect cables - no soldering required to install this unit.
It supplies selectable 5V or 12V to video transmitter and camera regardless of input voltage (2S to 6S). The TBS
CORE PNP PRO can supply video transmitters with up to 1W of emitted power (EIRP) and a standard FPV camera,
or charge a GoPro camera in-flight.
The built-in OSD (switchable) provides vital information of the state of the aircraft. No more throttle loss due to
over depleted batteries, flying at the edge of control signal, or forgetting to charge spare FPV system batteries.
Coupled with the new GPS module, the OSD will help you navigate and estimate distances, speed, and heading.
In a nutshell, the TBS CORE PNP PRO is a light-weight OSD and filtered power supply, feeding the pilot camera
and video transmitter, all in one compact package. It makes FPV setups super-easy and is a safety feature every
FPV aircraft should have. Suitable for any airplane and multirotor of any size. The simplified wiring reduces
points of failure and lets you focus on flying instead of worrying.
Key features
•
Dual 2S to 6S input voltage - additional input for backup (2S only)
•
Constant 5V @ max. 2A and 12V @ max. 600mA - individually, not combined!
•
OSD with GPS, battery voltage, current consumption, signal strength, callsign and timer display
•
Telemetry audio downlink or video input and mono audio pass-through
•
Very high switching efficiency
•
Extremely low ripple and low RF noise, two stage filtered and shielded casing
•
Supports 1W VTX with only minor airflow
•
All necessary cables included
•
Software upgradable and configurable
•
Small size, 27mm x 47mm x12mm, only 15.6 grams
1
